Pricing and Info

Try before you buy

» Download this trial
  

NOTE: AutoCAD 2009 compatible plus more

  
Other Related Links
» 3D PipeFitPro
» Autolist2000 by s9

PDF Brochure:

» Specs/ Data Sheet

Screenshots

Click thumbnails to enlarge

Easy command
interface

Inserting blocks

Toolbar flyout
& construction lines

Toolbars in Metric
& Imperial

Draw Steel Pipes

Draw Fittings

Draw Fittings

Draw Steel Flanges

PIPEFITPRO™
options

ANSI Pipe Fittings and Drawing tools at your finger tips

The latest version of PipeFitPro™ Drafting software includes exciting new features for drawing Pipe, Pipe Fittings & Pipe Symbols inside AutoCAD. Recently updated for AutoCAD 2009!

ANSI Pipe Fittings and quick drawing tools

PipeFitPro™ draws Pipes, Pipe Fittings and Pipe Symbols In AutoCAD. If you need to make a quick sketch of a pipe assembly or you have entire pipe runs to draw, PipeFitPro™ will help you do it! Recently updated for AutoCAD 2009.

Recent update includes ANSI Class 900, 1500 & 2500 flanges, enhanced block library features, enhanced user documentation of fittings and flanges and enhanced CustomPipe (Version 1.1).

PipeFitPro™ features

• Sizes DN 15 - 900NPS 1/2”-36”
• ANSI standards
• Custom Pipe sizes
• Metric & Imperial units
• Easy-to-use-toolbar
• Flange face
• Slip-On Flange
• Blind Flange
• Welding Neck Flange
• Socket Weld Flange
• Threaded Flange
• Lapped Flange
• Tees
• Short Radius Elbow
• Long Radius Elbows
• Fillet Elbows
• Pipe Center Lines
• Pipe ‘S’ Cuts
• Convert lines to Pipes NEW!
• 45° Long Radius Elbow
• Pipe Down
• Line End
• Offset half pipes diameter
• Segmented bends NEW!
• Flow arrows
• Construction line tools
• Layer tools NEW!
• Easy to install and password protected
• Get a free copy of CustomPipe™

Toolbar & Dialog Box Interface

PipeFitPro provides you with quick and accurate access to 20 common ANSI pipe size fittings. PipeFitPro™ comes with a Metric and Imperial toolbar. Access the main Dialog Box by picking on a size. The drawing units can be set in the PipeFitPro™Options.

Draw Steel Pipes

Draw Steel Pipes to ANSI standard B36.10. Included are commands to draw pipe ends, pipe sections and pipe caps. It’s much easier to work with accurate drawings. PipeFitPro™ gives you the tools to do it right the first time and every time! You’ll have your piping arranged in no time!

Draw Buttwelding Fittings

Draw Buttwelding Fittings to ANSI B36.9 & B16.28. Choose from Long and Short Radius Bends, Equal and Reducing Tees, Concentric and Eccentric Reducers. PipeFitPro™ will draw commonly used orthographic views of each Buttwelding fitting. Standardize the way you draw buttwelding fittings with PipeFitPro!

Draw Steel Flanges

Draw Steel Flanges to ANSI B16.5. Six ANSI flanges are available, Slip-on, Blind, Welding Neck, Socket Weld, Threaded and Lapped. With PipeFitPro you are always just a few clicks away from drawing complicated flange profiles. You can choose from three different pressure ratings, PN20/Class 150, PN50/Class 300 and PN100/Class 600. PipeFitPro™ can draw the flange face or flange side view.

Metric and Imperial Drawing Units

PipeFitPro™ works in both metric and imperial drawing units. Don’t be stuck looking for conversion tables. Care has been taken in the preparation of this software to ensure pipe fittings are drawn to the most commonly used standards in Computer Aided Design.

Customizable Drawing Block Management Facility

If you already have drawing blocks of pipe fittings or make new blocks in the future, it’s easy to incorporate them into PipeFitPro™. You can even use the PipeFitPro™ toolbar to access drawing blocks. Within each fitting size, you can define an insertion path of where your blocks are filed (on your local hard disk or network) and insert them as needed using the main PipeFitPro™ dialog box interface. See Options in PipeFitPro™ to set the path.

Drafting Symbols & Construction Tools

PipeFitPro™ provides a few handy drafting symbols and construction tools that you will use over and over again!The drafting symbols include a pipecut, flowarrow and pipedown symbol. You can offset half a pipe distance or set fillet to the radius of a long radius bend.

Toolbars

The PFP-M (Metric) & PFP-I (Imperial) toolbars come with PipeFitPro™. These toolbars incorporate the main PipeFitPro™ toolbar as a flyout and include 3 construction line commands: Vertical, Horizontal and Angled (45 degree).

Construction lines

The Construction line commands draw plain lines on a specific layer to the extents of your drawing from a selected point. It can be used to help developing orthographic views of your piping designs and their color can be set in the PipeFitPro™ Options.

Free copy of CustomPipe & More

Get a free copy of CustomPipe™ when you register. You can use your favorite PipeFitPro™ commands to draw any pipe size. CustomPipe™ also comes with it’s own toolbar and button.

The new Layer Toolbar is also available free to registered users and brings together a set of layer control and property commands. Also included free is the Construction Line toolbar as seen in previous versions.

Command Reference

Following are details of each command available in PipeFitPro™. Refer to PipeFitPro™ help file for more Command Reference information. Click here to view PDF file containing Command Reference.

Download a copy of PipeFitPro™ today!

With PipeFitPro™ you can obtain the full benefits of third-party software for your AutoCAD™ wherever you are working. It works effortlessly on standalone or networked AutoCAD™ and does not adversely effect the functionality of AutoCAD™ in any way.

It’s unique Password and User name system allows you to install and unlock the program on several PC’s at once i.e. at work and at home. If PipeFitPro™ is copied to another workstation it will require your User name and Password to be input again which ensures nobody else can use the program you have paid for.

Compatibility