Millwork Tools

Elevation   click icon to play
Draws upper and lower elevations of cabinets. Enter parameters into the dialog box and follow the command line prompts.

Splash  
Draw A back splash from the points you select in acad.

Raised Panels   click icon to view
Makes offsets of a rectangle to your pre defined input

Drawer Bank  
Converts a door into a drawer bank

Swing line Adjust
After stretching a cabinet up or down this will re-adjust the swing line and shelves

Center pulls
After stretching a cabinet the drawer pulls might be off center this will re center them

Plan Section  
Draws a plan section of cabinets. Enter the parameters and follow the command line prompts

Drawer Box  
Adds a drawer box plan section to a plan section of a cabinet

Section
Draws side sections of upper or lower cabinets. Enter the parameters and follow the command line prompts.

Line Bore & Shelves  
Adds Line bore to the section of a cabinet. Enter the parameters and follow the command line

Dividers
Draws vertical dividers inside an area. Enter # of dividers and thickness and it will evenly space them.

Wall Shelves  
Draws typical standards and brackets. Sections and elevations. Enter the parameters and follow the command line.

Wall Panel Elevation  
Draws typical wall panels with or without reveals

Wall Panel Plan Section  
Draws a plan section of wall panels with a selection of various corner conditions.

X Hatch
Draws an “X” inside a closed object. typical used to denote blocking

X Material
Draws two line inside a rectangle typically denotes a sub-straight

Slot
Draws a slot to your specifications

Viewport Tools

VP Layout  
Sends object(s) in Model space to Paper space at the scale you select then fills out the view label

VP Update
Once in paper space and you move the object(s) in model space, this will find the object(s) and put it back in the viewport at the original scale

VP Detail
Creates a detail viewport of an area of another viewport to a selected scale

VP Align
Aligns selected viewports vertically or horizontally.

Labeling Tools

Label Station  
A dockable dialog box with 3 tools in one. create callout flags with the information automatically filled out. Make leader text using pre-saved text with the text reaming the same until you choose another text. Make Finish symbol leader text from a list of saved text remaining the same until you choose another text.

Dim. Tools

Dimension Change   click icon to play
Global dimension layer change with a filter

V.I.F.
Adds the text V.I.F under existing selected dimensions

Dimension Text  
Select from a pre-saved list of text to insert above, below or replace dimension text

Arc Dimension
Converts an arch dimension to display the arc length

Edit Tools

Text Change  
Globally changes text size to a new size and you can filter layers

Copy / Rotate on Arc
Copies or Rotates the selected object(s) around a selected arc or circle to the distance specified

Stretch
Similar to Express Tools multi-stretch but it will divide the distance stretched by the number of crossing windows and stretch each object to that division

Move / Copy
Moves or copies the selected object(s) to the mid point of two selected points.

Layer Tools

QD Layer Setup  
Main layer setup for quick draw. use default QD layers or substitute your own.

Auto Layer  
Constantly runs in the background and detects the Text, Dimension, and Hatch commands and automatically changes to pre-set layers then returns back to the layer you where on.

Lay / Dim Change
For users that use the QD templates and layers. use the number pad keys to change layers and dimension styles

Layer Tools

QD Layer Setup  
Main layer setup for quick draw. use default QD layers or substitute your own.

Auto Layer  
Constantly runs in the background and detects the Text, Dimension, and Hatch commands and automatically changes to pre-set layers then returns back to the layer you where on.

Lay / Dim Change
For users that use the QD templates and layers. use the number pad keys to change layers and dimension styles

Plotting

Quick Plot  
Easy to use Plot utility

Misc. Tools

Layout Zoom
Cycles through all layout tabs and performs a zoom extents, viewport lock and saves when complete

ITM/MTI
ITM :quick display of an entered number on the command line converted from inches to millimeters MTI does the opposite.

Backup find
Finds the file with the sv$ extension of the opened drawing and brings it back for you after you crash or have an error

Viewport lock toolbar
Viewport lock and unlock .

Layer Edit toolbar
Just a handy toolbar of AutoCAD and Express Tools layer isolate, layer un-isolate, layer off, layer on. (I use these every day)

QD_4 Toolbar
1st button makes a viewport and all the others will scale and center the selected object(s) into the viewport